fanleaf
Well-Known Member
Hello Eveyone
Going to start off a perpetual grow in my new room today. Starting with 6 Auto's for the first month and then adding several photo periods from there.
I just finished building a new grow room in the basement. What a pain in the butt. Wanted something a little bigger than the closet that I had been using previously. I won't bore everyone with a bunch of talk so I'll show some pictures of the room being built and get on with the grow!
Strains to start the perpetual off with:
2X Pineapple Express auto
2x Girl Scout Cookies auto
1x Crystal Meth auto
1x Sweet Dark Devil auto
Soil:
Promix HP with 5% added Perlite
Pot Brand And Size:
Superoots air-pots all 7 gallon size
Light Source/s:
900W LED 520W Actual draw
600W LED 380W Actual draw
450W LED 285W Actual draw
300W LED 180W Actual draw
150W LED 105W Actual draw
NEEDLESS TO SAY I'M NOT SHORT ON LIGHT!
Nutrients will be the Advanced pH Perfect Extended Line
4" Blower/Carbon Air Scrubber, 16 inch wall fan, passive intake.
HERE WE GO!!!!!!!!!!!!!!
Well, I started building a room in the basement several weeks ago. Here are some pictures of the room during construction up until it got finished just the other day.
The basement before I started on it was nothing but concrete walls and floor.
For electric I ran 2 breakers to the room. Both breakers are 20 amp and each ran with 12-2 wire and each breaker runs 3 outlet locations. On one end of the room there is the 1 outlet in the small clone/starter closet and a 4 outlet box on the ceiling and a 2 outlet box on the floor on 1 breaker. On the other breaker for the other side of the room I have a 4 outlet box in the ceiling on that side as well as a 2 outlet box in the larger blower, supply closet and a 2 outlet box down towards the floor.
This will provide an excess of power capability to the nearly 2000 true watts worth of LED's that will be flooding the room. All outlets are 20 amp outlets as well.
The other closet with the drill in the picture is actually a big closet. Bigger than the opening anyways. In that one I built it at ceiling height so my blower and carbon scrubber can be there and out of the way of the plant area. The second closet is big enough for a bale of ProMix and all of my nutes, the blower and more. I think it will work out quite well. What do you guys think?
My old grow area was only about 3.8 feet X 3.5 Feet X 7 foot tall.
I decided to invest in some supplies and put myself to work. The new grow room is almost 6 feet wide by 7 feet long by 6.5 foot ceiling.
It's very very well insulated and here is a little 40 inch tall closet I built into the room for clones/starters. It will have a sealed door with it's own ventilation. Big enough for a small LED. Maybe my Advanced 150 would be perfect for it. As you can see I put 1 outlet in there too.
Going to start off a perpetual grow in my new room today. Starting with 6 Auto's for the first month and then adding several photo periods from there.
I just finished building a new grow room in the basement. What a pain in the butt. Wanted something a little bigger than the closet that I had been using previously. I won't bore everyone with a bunch of talk so I'll show some pictures of the room being built and get on with the grow!
Strains to start the perpetual off with:
2X Pineapple Express auto
2x Girl Scout Cookies auto
1x Crystal Meth auto
1x Sweet Dark Devil auto
Soil:
Promix HP with 5% added Perlite
Pot Brand And Size:
Superoots air-pots all 7 gallon size
Light Source/s:
900W LED 520W Actual draw
600W LED 380W Actual draw
450W LED 285W Actual draw
300W LED 180W Actual draw
150W LED 105W Actual draw
NEEDLESS TO SAY I'M NOT SHORT ON LIGHT!
Nutrients will be the Advanced pH Perfect Extended Line
4" Blower/Carbon Air Scrubber, 16 inch wall fan, passive intake.
HERE WE GO!!!!!!!!!!!!!!
Well, I started building a room in the basement several weeks ago. Here are some pictures of the room during construction up until it got finished just the other day.
The basement before I started on it was nothing but concrete walls and floor.
For electric I ran 2 breakers to the room. Both breakers are 20 amp and each ran with 12-2 wire and each breaker runs 3 outlet locations. On one end of the room there is the 1 outlet in the small clone/starter closet and a 4 outlet box on the ceiling and a 2 outlet box on the floor on 1 breaker. On the other breaker for the other side of the room I have a 4 outlet box in the ceiling on that side as well as a 2 outlet box in the larger blower, supply closet and a 2 outlet box down towards the floor.
This will provide an excess of power capability to the nearly 2000 true watts worth of LED's that will be flooding the room. All outlets are 20 amp outlets as well.
The other closet with the drill in the picture is actually a big closet. Bigger than the opening anyways. In that one I built it at ceiling height so my blower and carbon scrubber can be there and out of the way of the plant area. The second closet is big enough for a bale of ProMix and all of my nutes, the blower and more. I think it will work out quite well. What do you guys think?
My old grow area was only about 3.8 feet X 3.5 Feet X 7 foot tall.
I decided to invest in some supplies and put myself to work. The new grow room is almost 6 feet wide by 7 feet long by 6.5 foot ceiling.
It's very very well insulated and here is a little 40 inch tall closet I built into the room for clones/starters. It will have a sealed door with it's own ventilation. Big enough for a small LED. Maybe my Advanced 150 would be perfect for it. As you can see I put 1 outlet in there too.
gonna be a good one
