DNA Lemon Skunk Hempy Grow

BlueDog said:
Hey peace man good news on the mites but you left out the most important info - how does the floor look?

Must be a generational thing but I've never had any desire whatsoever for a tattoo. I think 90% of them look like shit. All these hoops players have their life story written on their bodies... now they're almost out of room and their lives are just starting. But that's just me :smokin2:

Sisco you can run but you can't hide. This will be like OMM's journal, a perpetual completed journal :cheertwo:

Sounds like you really like your ph meter? If you were getting one right now would that still be the one? And what fluids would I need?

I just got the stuff from SNS and it included bloom and veg supplements... kelp, humic acid etc. I'm trying it out but the stuff is very dark colored and my ph drops won't work with it, so I think I'm going to bite the bullet again and get a meter.

Thanks bro!
Click to expand...

Hay BD, I got a cheap $20 Milwaukee meter that sucked. The screw driver adjusting was a pain for me, and then I found out the meter was screwy.

I got this one:

Hanna Instruments Hi 98127 Ph Temperature Tester

and it's great. Auto calibrating makes it real easy to use. I keep a little water, or calibration solution in the cap, makes for some hellacious suction when I try to pull it off. I ended up wrapping some duct tape around the cover to give a little more gription.

:peace:
 
52Firestone said:
Vintage Bicycles :) if you look at my visitor page you will see my 52 Firestone, I also have a 1950 Schwinn Panther. When I got hurt at work I ended up selling most of my bikes so I could survive. At one point I had 23 bikes from 1949-1962
Click to expand...

Cool - It's a little newer than that range, but I used to have a killer Schwinn Stingray with a 2 speed kickback hub that would probably be worth some $$ today. Wish I still had it! That bike flat out rocked.

I used to know a guy who's dad owned a hardware store. They dug a Columbia out of an old storage area that was still in the box from the 50's or 60's. He couldn't resist building it, and that thing was sweeeeet. Had a tank on it, chrome, balloon tires, etc. It was a brand new bike, and looked it too.

Sorry didn't mean to highjack your thread, Sisco!
 
Sisco I must be high I can't find where you were telling us what meter you got. I remember reading a big dialog between you and Bandit... can you tell me what meter and solutions to get again thanks!

And Horse thanks for your link, which solution do I also need to order?
 
BlueDog said:
Sisco I must be high I can't find where you were telling us what meter you got. I remember reading a big dialog between you and Bandit... can you tell me what meter and solutions to get again thanks!

And Horse thanks for your link, which solution do I also need to order?
Click to expand...

BD, I have both 4 & 7, but I only use the 7. With the digital, it's mostly set and forget.

:peace:
 
BlueDog said:
Sisco I must be high I can't find where you were telling us what meter you got. I remember reading a big dialog between you and Bandit... can you tell me what meter and solutions to get again thanks!

And Horse thanks for your link, which solution do I also need to order?
Click to expand...
Here you go BD,
KGrHqUOKikE0slSLVEQBN_GWlm1Q_0_12.JPG
 
Well, if you want a fancy smancy dancy prancy lancy wancy..uh ph pen....lol

I had no problem calibrating, it's very simple to do.. You use the liquid that comes with and some Distilled water.

When you put your ph pen in the 7.0 liquid it will read something like 5.8...
you know it should read 7.0~ so, to calibrate it you stick it in the Distilled water to rinse off the 7.0 soulution.

Then you break out that little screwdriver that is in the ph pen case and in the back of the Ph pen is a little hole where the screw driver fits. You simply turn to the left or right to get the numbers to display 7.0 while you have the ph pen in that soution.

Once you have it reading 7.0 take it out and rinse it off in the DW (distilled water) and break out the 4.0... this is just to check the calibration on a different ph level...

If it don't read 4.0 you slip open the battery compartment and there is another screw there for calibrating to 4.0. Then when it does, you don't need to do that again.

I keep checking if the calibration needs to get tweaked but so far I have not had to.

Sounds like a pain in the ass, but to me it was simple. Whatever you decide to use is up to you bro :goodluck:
 
siscokid said:
Well, if you want a fancy smancy dancy prancy lancy wancy..uh ph pen....lol

I had no problem calibrating, it's very simple to do.. You use the liquid that comes with and some Distilled water.

When you put your ph pen in the 7.0 liquid it will read something like 5.8...
you know it should read 7.0~ so, to calibrate it you stick it in the Distilled water to rinse off the 7.0 soulution.

Then you break out that little screwdriver that is in the ph pen case and in the back of the Ph pen is a little hole where the screw driver fits. You simply turn to the left or right to get the numbers to display 7.0 while you have the ph pen in that soution.

Once you have it reading 7.0 take it out and rinse it off in the DW (distilled water) and break out the 4.0... this is just to check the calibration on a different ph level...

If it don't read 4.0 you slip open the battery compartment and there is another screw there for calibrating to 4.0. Then when it does, you don't need to do that again.

I keep checking if the calibration needs to get tweaked but so far I have not had to.

Sounds like a pain in the ass, but to me it was simple. Whatever you decide to use is up to you bro :goodluck:
Click to expand...

Thanks buddy!

I'm torn now. I'm leaning towards the auto meter but then I'm sure all I'll be hearing from you is "hey dog you need to check the ppm's on that supplement too bad you don't have a meter' or 'man when I finally got those ppm's dialed in it increased my yield by 200%".

I'm gonna smoke on this some more ... I love this new toker guy :smokin2:
 
BlueDog said:
Thanks buddy!

I'm torn now. I'm leaning towards the auto meter but then I'm sure all I'll be hearing from you is "hey dog you need to check the ppm's on that supplement too bad you don't have a meter' or 'man when I finally got those ppm's dialed in it increased my yield by 200%".

I'm gonna smoke on this some more ... I love this new toker guy :smokin2:
Click to expand...

Sure, take your time man...lol @ 200% increase and the toker guy has been around bro. :tokin:
 
siscokid said:
Please check this out if you have not already! Dear Medical Cannabis supporters
Click to expand...

Thanks for sharing this Sisco - will do what I can do. They mention that this is gearing up to be the definitive battle in medical pot (or something to that effect). I couldn't agree more. I feel like everything is at a tipping point right now and everyone needs to make their voices heard so things don't start moving backward. Hopefully, people will.

And how can they justify criminalizing people like the two mentioned in the letter!? Sigh.
 
xlr8 said:
Thanks for sharing this Sisco - will do what I can do. They mention that this is gearing up to be the definitive battle in medical pot (or something to that effect). I couldn't agree more. I feel like everything is at a tipping point right now and everyone needs to make their voices heard so things don't start moving backward. Hopefully, people will.

And how can they justify criminalizing people like the two mentioned in the letter!? Sigh.
Click to expand...
It's scary what our money is being used for. Stay safe :Namaste:
52Firestone said:
Hey mr. sisco!

How much herb are you using to make those delicious looking muffins? I got a lot of this mystery bud that I'm getting tired of smoking and thinking I would make a batch:)
Click to expand...
I used 7 grams this time for 6 muffins, the other 6 were original. They are real good. :drool:
 
Back
Top Bottom