- Thread starter
- #421
BedroomFarmer
Well-Known Member
Thanks pw! Im getting really antsy to flip these girls!
BF Afghan Coco/Growstones Grow Sponsored By MightyGrow 2017
Bloodguy
Well-Known Member
BF is going to be responsible for my overcrowding issues! I stop by and I see those delicious Afghanis and I say to myself, I could fit a couple more plants... what's one more tent... another light won't cost too much for power... a couple more fans... But then I need more seeds if use my afghanis... It's a vicious cycle. Soon my 2 bedroom house will be a one room studio with a couple grow rooms attached! Keep up the good work man!
Woah that lights give out some serious, serious light. Haha! I can't believe it bleached leaves low down on the plant like that, that's insane. I have a feeling they're going to create some amazing results when it comes to flowering time BF. Can't wait to see this get flipped 
!
!- Thread starter
- #424
BedroomFarmer
Well-Known Member
I wish i could convert my living room to a giant grow room! I live in a one bedroom apt so id only have a kitchen and a bedroom. I could live like that! But i dont think my wife would be very happy!
Woah that lights give out some serious, serious light. Haha! I can't believe it bleached leaves low down on the plant like that, that's insane. I have a feeling they're going to create some amazing results when it comes to flowering time BF. Can't wait to see this get flipped
Thanks tk!! I couldnt beilve it either! I need to keep an eye on it. I cant wait to see what kinda buds it produces!
I could live that way too .
I can only dream of a space as big as my front room to use as a whole grow room haha. That would be awesome. One day! I could also live like that BF, your not alone I love it that much. Defintley keep an eye on them plants under that light, it's a beast! It's gonna create some serious buds and I can't wait to see em!
- Thread starter
- #427
BedroomFarmer
Well-Known Member
Whats crazy is some people are getting light burn with 4 of those Samsung led boards in a 4x4 tent. They have to be dialed down. Those boards are the way to go! So much cheaper 4 Boards compared to the recommended 1 cob per sqfoot. Im running under that with 12 cobs in my 4x4 tent. I will only use boards or a boards and cob combo for any future builds.
I looked at quantums and wavy boards, looked fairly inexpensive compared with cobs.
- Thread starter
- #429
BedroomFarmer
Well-Known Member
Its the way to go for sure!! Plus no need for heatsink if you run under a certain wattage
Easy to piece together?
- Thread starter
- #431
BedroomFarmer
Well-Known Member
I think the hardest part to building some boards is making the rails. I didnt want to deal with aluminum angle or drilling everything so it linned up well. I bought some premade rails but with the boards id have to make the rails. Im bad with measurments but it seems doable.
Im looking at Timber plug and play 600w 3000k 90cri
Tio Hector
Well-Known Member
BF, do you have a journal on how you built your cob setup
- Thread starter
- #434
BedroomFarmer
Well-Known Member
That sounds like a great setup! There is so much conflicting Info. Buck recommends a mix for better efficiency but that post has some big plants under the 90cri. I wonder what timber suggests for best flowering?
Hey tio! No i dont unfortunately but there are a lot of great resources on the webs and i will try to answer any questions you have. I do want to suggest you look at the samsung led boards over cobs. They are less heat then cob, less expensive to build up, and looks easier to put together. They offer excellent coverage. This is just what im reading about them. I hope to build some soon. I think id stick to 4 panels in a 4x4 tent
- Thread starter
- #435
BedroomFarmer
Well-Known Member
Ill find out what they say about it.
Bloodguy
Well-Known Member
I'm confused about this led board. Does this replace the power supply or does it actually produce light? I googled it but I'm not sure.
Gauge Steel
New Member
Penny, i have the Timber Plug and play Cree 300 watt 6 chip and i love it. I have already fried two seedlings with my light well over 20" so be warned, they are mucho powerful. The Dimmer is a very nice feature.
- Thread starter
- #439
BedroomFarmer
Well-Known Member
Let me know what they suggest for a flower only light. Very interested
The board is like a cob chip when it comes to wiring. Very easy, they are ran off led drivers like meanwell. The boards replace the need for cobs and offers a more even light coverage compared to a cob chip. Looks like 4 boards in a 4x4 tent is sufficient but im not sure how many watts they are running them or if they have flowered with them yet. They produce a lot of light though.
Yeah im learning the cobs are super strong. Got some bleaching on my lowest buds on the plant this is currently flowering. I turned my lights down to 200 watts total and will get them to about 18" over the plants then slowly power up the light. Probably be at full tilt by end of flower or something.
Im running 12 cobs at over 600 watts from the wall. I wish i had a par meter or something. Not sure where the cut off is for needing co2.
- Thread starter
- #440
BedroomFarmer
Well-Known Member
I know this is a sponsored thread but this is a post on lights not other brands of fertilizer or nutrients. I think this is extremely helpful info but if mgo has an issue with this post he can request it be taken down.
Anyone interested in cobs or boards should def check out bucks and shiggs thread. Great info to intake there
Shiggity Goes Mad Scientist - Paving The Yellowbrix Road With DIY Adventures!
Heya Shiggs and gang, hope your weekend has been great. Got the new lights up in the tent and we're liking them so far, bright as all get out for sure. Lighter than the low cost LED lights we had been running and we have high hopes these will do the trick for us. It was a kit from HLG mostly because we don't know how to figure out what parts we needed. Great service from them as well. Want to order more but they are out of stock at the moment anyway.
Hope you don't mind us dropping a few pics Shiggs, just would like your input on the kit? Things look correctly matched?
Blessed Buds our friend and be well
That setup with driver is exactly what I am making except 3 boards. Same total power. 2 setups per 4x4. Looking good! My next lights I'm hopefully finishing Monday have the same color heatsinks. Just individual. Here is a light that may or may not be headed to stage.
Ima be running 12 boards ...Kinda skeery ...
I keep lowering my estimate for driver power. From what I hear from you guys, 650 watts is going be pretty bright in a 4x4.
Bright enough to be dimmed 20% and still require Co2. Honestly I am so impressed by CMH lights but when in a room with Samsung boards the CMH looks like it is a T5. No exaggeration. Here the CMH is lighting the foreground scrog 2 weeks ago and the beast is over the scrog in back. I swear the CMH is on lmao! And look no light is directly over the pineapple fields on the right. That is all from the beast light. The pineapple fields is getting more light from the beast to the side than the foreground scrog is getting from the CMH directly over it. Now imagine the effect of four overlapping lights!
Anyone interested in cobs or boards should def check out bucks and shiggs thread. Great info to intake there
Shiggity Goes Mad Scientist - Paving The Yellowbrix Road With DIY Adventures!
Similar threads
