Auto Growers Club

My three legged Blue Mammoth Auto. Only a week or two left!

420-magazine-mobile1274603853.jpg
 
GrowMedicine said:
Hi Velk, temperature and humidity are certainly linked so if you have a low temperature, say around 17-18 c you will have a lot higher RH rating than if your temperatures were around 23 c. I run my room around 22-25 C and have a RH around 50% or lower. The only way I can get up around 70-80 RH would be if I had a room temperature of around 12C or were to wet the tables and floors. My biggest challenge in veg was to actually increase humidity. A humidifier or a dehumidifier can help with a stable RH for all grow phases.

Hope this helps.

GM
Click to expand...

My temps are always 23c+ matey I think I resolved the issue a plant was near the intake and it's fabric pot was wet so even at 26c was 80 rh and it's never that but Mrs did mop and that today so thinking maybe that I have two dehumidifyers Lol In the tent and ac with built in dehumidifyer so I don't know I've moved the plant from the intake and the rh dropped loads by like 20% so that may have had something to do with it I don't get why with high temps my rh is that high still don't make sence to my pea brain .. thanks for the advice bro much apresiated


Sent from my iPhone using 420 Magazine Mobile App
 
Velk i cnt comment really on messing with ph cause i never have.i learned to grow using my eyes hard times and good.but the feed i use is ph perfect and the soil biobizz lightmix is also ph perfect keeps it in range from start to finish;) im refering to growing in soil and soil also buffers itself.my current auto ladies are in cheap compost a selfset challenge and still perfect health;) alot of growers over think ph and mess with ph and cause more problems than good.as long as u know ur plant has all it needs then u cnt go wrong.look at ur plants alot they will tell u if something is wrong;) hope this.helps.happy growing and merry christmas growers;)
 
Canno when u start tying down and keep tying down till ur hapy with final structure.then u keep her tied down in that position until harvest.;) happy growing and merry christmas
 
thebeast27 said:
Canno when u start tying down and keep tying down till ur hapy with final structure.then u keep her tied down in that position until harvest.;) happy growing and merry christmas
Click to expand...
Thx I was just tying trying to give light but the first thing I did was almost 90° bend. This is what I have so far. I have no idea what structure would be best
420-magazine-mobile1454229918.jpg


Sent from my 5054N using 420 Magazine Mobile App
 
Thanks beasty one last question when should I start adding pk ? As I feel these will be finished in about 30/40 days I have no clue when to add as my feeding shedule is for photos merry Christmas bro and thanks for all the help


Sent from my iPhone using 420 Magazine Mobile App
 
Velk - I would have questioned the ph too. I had some serious ph problems with my earlier grows. Flushing with 2-3 times your container size (i.e. 6 gallons for a 2-3gallon pot) with ph'd water helps get it back to normal. It will take a couple of days too.:Namaste:
 
Cannoisseuras - here is a photo of a topped auto (Amnesia Haze). With some LST, all the buds are growing up at almost the same level.

AH_day_48.JPG
 
You should give her some time. After flushing, I would wait 3-5 days before doing anything. You seriously over-water to flush, so she might get even droopier for a day or so until she starts to come back.

I would not flush a gallon and then put nutes back. I would flush and wait a couple days until you see recovery, then you can go with a normal feeding.

One thing I have learned with soil, is I can not feed them for a week or more before I would see something happen. Nothing changes quickly. Or so it seems :Namaste:
 
Hello all, I thought I would post some pics of my first indoor grow. I have a Mars II 700, and a 30 x 30 x 68" tent.
420-magazine-mobile278538058.jpg
420-magazine-mobile1723215735.jpg


Sent from my SM-N910T using 420 Magazine Mobile App
 
Back
Top Bottom