Advice on bags

S

safeman

Well-Known Member
presently going to run dry ice method BUT only want to use 1 or 2 bags -- here are the one's considered:
70 micron and then 120 --- ?
90 micron ?
have heard this use 73 then 160 (saying the 73 catches nothing but resin and the 160 catches the mid-grade)
Then a 220 for cooking]

Thanks !!
 
safeman said:
presently going to run dry ice method BUT only want to use 1 or 2 bags -- here are the one's considered:
70 micron and then 120 --- ?
90 micron ?
have heard this use 73 then 160 (saying the 73 catches nothing but resin and the 160 catches the mid-grade)
Then a 220 for cooking]

Thanks !!
Click to expand...
@Joe Brewster has a nice thread on making hash. He talks about the micron bags and what the differences are between mesh and micron too. ( the last two pages or so about that)

Joe Brewster

Thread 'Winter Hash'

it's time to make some winter hash. anybody else got winter blues , now is the best time for winter hash
all you need is -30 c degrees, a 100 micron nylon strainer bag, and a garbage bag
just like having a walk in freezer :D

put all your leaf, larf or popcorn bud in the nylon bag then put that in the garbage bag
leave outside in -30 c for 4 hours, hold strainer bag with garbage wrapped around & shake for 5-10 min
( probably closer to 5 min It's d*m cold outside )
go inside, pour out all your beautiful trichomes & press into hash
you can shake it a couple of times
:passitleft...
  • Like
  • Love
 
Sativa1970 said:
Do you only have a couple bags? I use all of my bags, think there are 5 or 6. Always curious of the quality of the plant. After separating I may combine different sizes together. Doesn't add much time or work to the process.
Click to expand...
I have the full set - just lazy This run going for and average run - going to try to press it ( temps 170 and 190 //start at 180 for 65seconds Note: when pressing kief you want to keep the temps lower nut increase pressing time) any thoughts @Lady Cannafan thanks will checkout hisn posts Thanks guys !
 
safeman said:
I have the full set - just lazy This run going for and average run - going to try to press it ( temps 170 and 190 //start at 180 for 65seconds Note: when pressing kief you want to keep the temps lower nut increase pressing time) any thoughts @Lady Cannafan thanks will checkout hisn posts Thanks guys !
Click to expand...
I have not pressed Kief...yet. I've only done the nugs in the pre-mold presses to make a puck, then into the rosin press.
Let me check on the notes or video I took and see what my optimum temp was for pressing. Be back in a bit. :)
 
safeman said:
I have the full set - just lazy This run going for and average run - going to try to press it ( temps 170 and 190 //start at 180 for 65seconds Note: when pressing kief you want to keep the temps lower nut increase pressing time) any thoughts @Lady Cannafan thanks will checkout hisn posts Thanks guys !
Click to expand...
Okay, just checked and 190 was my personal optimal temperature. I did it over the course of about 2 to 3 minutes, gradually.
I will probably try 180 for Kief. As soon as I have some done up. I don't currently have enough to make it worthwhile pressing.
 
Back
Top Bottom