420's Canuk Seeds Comparative Grow By Absorber

34 days above ground

I've got some CalMag turning up in 2 days ( it can't get here fast enough šŸ˜Š)
Cherry Pie Bottom Right needs some .
Cyco nutrients @600ppm
pH between 5.8- 6.1
Room temp @ 28 Ā°c
Room humidity 70%

I will be topping and training these in 2 more days just waiting on my digital timer for my cloning bubbler to arrive
12/12/23

12/12/23

Green Crack BackLeft
Obi-WanKushBackRight
Acapulco GoldFrontLeft
Cherry Pie FrontRight

Little picture of the electric light lifter i designed and made ,it has its work cut out lifting this heavy 1000w light
12/12/23

12/12/23

  • Media owner Absorber
  • Date added
3d printed electric light lifter positioned in the centre of the roof šŸ˜Š
These little babies are struggling a little bit the soil blend was a bit high in pH and the reservoir last week was high in ppm so I've rectified the reservoir and they are starting to grow a bit more they could do with a feed of CalMag too
Room temperature @29Ā°c
Humidity @68%
12/12/23

12/12/23

Green Crack BackLeft
Obi-WanKushBackRight
Wedding CakeFrontLeft
Cherry Pie FrontRight

Thanks for stopping by happy safe growing all
 
It's really fun to watch your grow play out. You are meticulous and it shows. The plants are lovely!
 
Oh shucks Carmen šŸ«‚ thanks.
I just hope they play ball all the way its been a few years and im a little rusty šŸ˜Š

Carmen Ray said:
It's really fun to watch your grow play out. You are meticulous and it shows. The plants are lovely!
Click to expand...
 
NickHardy said:
So the lifter - that's very cool. It has like propshaft with a spindle on each end to wrap the cable, and then thatā€™s geared to some sort of two way electric motor? Is it geared for the weight or just needs more power?
Click to expand...



Here's a video of it working, only 1 motor used its geared to cope with the weight and to slow it down ,runs on 12vdc so reversing the polarity reverses the motor

3D printed items for grows

www.420magazine.com
20231208_155656.jpg

Its basically the same as the bottom picture with longer bit of 50mm pipe and two more tappered collars on the shaft to keep the ropes in place
20231210_113905.jpg
 
Absorber said:
Here's a video of it working, only 1 motor used its geared to cope with the weight and to slow it down ,runs on 12vdc so reversing the polarity reverses the motor

3D printed items for grows

www.420magazine.com
20231208_155656.jpg

Its basically the same as the bottom picture with longer bit of 50mm pipe and two more tappered collars on the shaft to keep the ropes in place
20231210_113905.jpg
Click to expand...
So you can actually call yourself an inventor. This is amazeballs!
 
Carmen Ray said:
So you can actually call yourself an inventor. This is amazeballs!
Click to expand...
Thankyou šŸ˜Š
I've been doing it for years, its how my mind works ,the 3d printer has changed my life because I can think of an idea design it on the computer and print and test it all within hours .
I only wish they were around when I was 16šŸ¤”
 
Nicely done on the winch thing and I hope those cords are well secured into the collars! So many light falls on this site I'd hate to see 1000w come plummeting down anticlockwise onto the plants. šŸŒ

Excellent net placement over the soil ones to give them something to aim for too!
 
InTheShed said:
Nicely done on the winch thing and I hope those cords are well secured into the collars! So many light falls on this site I'd hate to see 1000w come plummeting down anticlockwise onto the plants. šŸŒ

Excellent net placement over the soil ones to give them something to aim for too!
Click to expand...
Thanks ,
Yea the cords won't come out they are securely tied and knot is wedged inside the barrel aswell šŸ‘ .
Trying to give them incentive with the net šŸ¤£šŸ¤£
 
Absorber said:
Thanks ,
Yea the cords won't come out they are securely tied and knot is wedged inside the barrel aswell šŸ‘ .
Trying to give them incentive with the net šŸ¤£šŸ¤£
Click to expand...
That seems like an awfully small motor to be doing that much work. But if itā€™s working properly then cool. CLšŸ€
 
CaptainLucky said:
That seems like an awfully small motor to be doing that much work. But if itā€™s working properly then cool. CLšŸ€
Click to expand...
Amazing what gearing does ,I was dreaming thinking the first motor I tried would work šŸ¤£šŸ¤£
 
37 days above ground

I topped all 4 in the first tent and lowered the scrog net and manipulated a few branches around, I will do a light defoliation of the lower side foliage on the lower sections of the branches and do a final training in the next day or so after they recover a bit more from the stress I applied today. They are recovering quite quickly though.
Cyco nutrients @600ppm
80ml of CalMag 4.0.0 added to my 80ltr reservoir today
pH between 5.8 - 6.1
Room temp 28 Ā°c
Room humidity 68

15/12/23

15/12/23

Green CrackBackLeft
Obi-WanKushbackRight
Acapulco GoldFrontLeft
Cherry Pie FrontRight

Picture of the reservoir with the vertical pipe with the Bell Syphon inside it that controls the flooding and draining of the 4 buckets it the tent

15/12/23

15/12/23

Reservoir with Bell Syphon inside vertical pipe

2nd tent with SIP'S they are starting to settle into their soil mix my CalMag turned up today so I gave both tents a dose of it .
These 4 plants are starting to grow a bit faster now so hopefully the hot soil issues are sorted
temperature 28Ā°c
Room humidity 70

15/12/23

15/12/23

Green Crack BackLeft
Obi-WanKushBackRight
Wedding CakeFrontLeft
Cherry Pie FrontRight

Happy safe growing peoples and thanks for dropping by .
 
Absorber said:
37 days above ground

I topped all 4 in the first tent and lowered the scrog net and manipulated a few branches around, I will do a light defoliation of the lower side foliage on the lower sections of the branches and do a final training in the next day or so after they recover a bit more from the stress I applied today. They are recovering quite quickly though.
Cyco nutrients @600ppm
80ml of CalMag 4.0.0 added to my 80ltr reservoir today
pH between 5.8 - 6.1
Room temp 28 Ā°c
Room humidity 68

15/12/23

15/12/23

Green CrackBackLeft
Obi-WanKushbackRight
Acapulco GoldFrontLeft
Cherry Pie FrontRight

Picture of the reservoir with the vertical pipe with the Bell Syphon inside it that controls the flooding and draining of the 4 buckets it the tent

15/12/23

15/12/23

Reservoir with Bell Syphon inside vertical pipe

2nd tent with SIP'S they are starting to settle into their soil mix my CalMag turned up today so I gave both tents a dose of it .
These 4 plants are starting to grow a bit faster now so hopefully the hot soil issues are sorted
temperature 28Ā°c
Room humidity 70

15/12/23

15/12/23

Green Crack BackLeft
Obi-WanKushBackRight
Wedding CakeFrontLeft
Cherry Pie FrontRight

Happy safe growing peoples and thanks for dropping by .
Click to expand...
I got the Platinum Series Cyco kit with the extra ingredients on the way, so I ba e literally everything. Any advice or guidance you might have for me, here or in DM, would be most appreciated. Thank you!!!
 
Jon said:
I got the Platinum Series Cyco kit with the extra ingredients on the way, so I ba e literally everything. Any advice or guidance you might have for me, here or in DM, would be most appreciated. Thank you!!!
Click to expand...
I've only started using it on the tail end of my previous grow so still new to it myself ,one thing I have noticed is pH will swing a little and you will need to add CalMag aswell.
 
Absorber said:
37 days above ground

I topped all 4 in the first tent and lowered the scrog net and manipulated a few branches around, I will do a light defoliation of the lower side foliage on the lower sections of the branches and do a final training in the next day or so after they recover a bit more from the stress I applied today. They are recovering quite quickly though.
Cyco nutrients @600ppm
80ml of CalMag 4.0.0 added to my 80ltr reservoir today
pH between 5.8 - 6.1
Room temp 28 Ā°c
Room humidity 68

15/12/23

15/12/23

Green CrackBackLeft
Obi-WanKushbackRight
Acapulco GoldFrontLeft
Cherry Pie FrontRight

Picture of the reservoir with the vertical pipe with the Bell Syphon inside it that controls the flooding and draining of the 4 buckets it the tent

15/12/23

15/12/23

Reservoir with Bell Syphon inside vertical pipe

2nd tent with SIP'S they are starting to settle into their soil mix my CalMag turned up today so I gave both tents a dose of it .
These 4 plants are starting to grow a bit faster now so hopefully the hot soil issues are sorted
temperature 28Ā°c
Room humidity 70

15/12/23

15/12/23

Green Crack BackLeft
Obi-WanKushBackRight
Wedding CakeFrontLeft
Cherry Pie FrontRight

Happy safe growing peoples and thanks for dropping by .
Click to expand...
Looking good bro šŸ‘Œ I got my net in now too šŸ˜Ž I'll update later with my masterpiece šŸ˜‚

I need my details on this flood and drain when you have time. My brains not working šŸ¤¦ā€ā™‚ļø
 
Your plants are looking so healthy Absorber.
 
Back
Top Bottom