10x10 RDWC

[Lurch Farmer]

Hello all,
the important stuff:
stealth is a must mainly the smell must not escape
seeds are random good bag seed
10x10x8 roominside an 11x15x8room) in the back of my trailer (that just happens to sit dead center of t-park)
will be split in to 3-4 ,3x3 spaces, 1 3x3x4 veg,3x3 mother cab, and hopfully a 3x3 will be left for drying
lights- veg 4- 65w cfl (satco hi-pro natural, 5000k, 4300 lumens)
lights -flower- 2-400w ipower HPS
the veg planis a 5 gal rubber made tote with air stones
the sytem-each flower-3" net basket and clay pellets germed seeds placed expanding peat disk things, eco 260 submersible pump, 1/2" delivery and return lines and 4 -5 gall buckets
circulation in the front coner is a heater duct (furnace is dead) for in take through a diy neg.ion scrubber using a 100 cfm ( fart fan), 1 wall mount and 1 standing oscillating fans,Mercury 3 - DayNight Fan Speed Controller, a 20" floor fan for the up skirt air, and a squirle cage typ fan that realy sends air movin to push air out top of room to hall where it meets a 10" Inline Fan 780cfm and carbon filter to exit back through house. AN SENSI grow and bloom.

I do believe that covers every thing
pics will be add as soon as my computer desides to remove its cpu from its waste basket
I give thanks for the knowledge that is shared so freely in this 420 community in advance for any and all advice

 

[Lurch Farmer]

sorry about the wrong measurements

flower room#1

420 Magazine
florer room#2 with THING

4 auto lowrider gangas

6 bag seed
420 Magazine

diy air scrube rwith ion emiter

 

[Lurch Farmer]

update time

 

[Lurch Farmer]

21 days from seed half nute

the autos i will be spiting them up into separate buckets in hopes that more space will cause plat development

 

[Lurch Farmer]

sorry for double post
computer malfunktion

 

[Lurch Farmer]

This is my R-n-D department, she hates it when I leave her out of the room, as it is winter I will stop leting her in when I start useing the flower area,

 

[Lurch Farmer]

Some new photos

 

[Lurch Farmer]

Unfotunatly I have no ph tester, I think that is why plats look dropy. or I am reading ppm wrong.
Any suggestions?
the 3x3 rdwc is ether a veg space under 4-65w cfl for 2-3 week after germ.
Then idea 1: place 400w hps in closet????????????????
or
idea 2:move the ladys to the lightin lage area??????????????????????
any suggestions
the 4 autos need help don"t seem to be doin any thing ?????????????
The ppm: do i test the water than add nutes till I reach 450-500, or say tap water reads 150, do I ajust so it reads 550-600?

 

[Lurch Farmer]

I seem to be the only one reading my journal.oh well,update time

veg is built in to flower, with its own enterance

sog seedlings

temp veg/clone

after trim and bending

 

[Surf Striper]

I am reading farmer, nice pics and plants. You really need a ph meter only way to run hydo to many things go wrong fast. You must be on top of it.
Keep up the good work. I will be reading, nice watchdog.

 

[Lurch Farmer]

Using a fast producing CO2 Generator - YouTube
just wondering would this work for our ladys

 

[throwdo]

id go to wallyworld and buy a aquariem ph tester for like 5 bucks until you can get a better one

 

[Lurch Farmer]

I got 1 fro amaron in the mail
a few picks before trim 36 houres before 24 dark

I hope this one is female. lots of sog or mother potential

 

[ajagunle]

Unfotunatly I have no ph tester, I think that is why plats look dropy. or I am reading ppm wrong.
Any suggestions?
the 3x3 rdwc is ether a veg space under 4-65w cfl for 2-3 week after germ.
Then idea 1: place 400w hps in closet????????????????
or
idea 2:move the ladys to the lightin lage area??????????????????????
any suggestions
the 4 autos need help don"t seem to be doin any thing ?????????????
The ppm: do i test the water than add nutes till I reach 450-500, or say tap water reads 150, do I ajust so it reads 550-600?

Hi Lurch

were you in films back in the day? Or an ancestor perhaps?

Not entirely sure what you are describing, but, I would use as much room available to flower, with HPS

Can't really help with the Autos, maybe when your ph pen arrives you will have an answer?

I am not sure it is correct but I think you measure total ppm, google it maybe, and try and get ready to harvest the rain!
The bending looks to be going well
By commenting I am sub'd so will be popping in regularly, I couldn't get the link in sig to work, just takes me to 420 home page, here's some instructions

GiGa grows autos, check his journal for tips, or after making a compliment, ask him?

Don't get disheartened traffic is low, it'll pick up!

 

[Lurch Farmer]

LMao
(at 6'4 my gramps figured it fit )


Thank you for the sig correction, I never bothered to make sure I did it correctly.

 

[Lurch Farmer]

I do not under stand these autos
I made the mistake of puting fresh tap water in res change and it seems they jumped 3 " over night?

 

[Lurch Farmer]

Due to masive light leaks, veg room is moving out of 8x8 into almost 3x4
Unfortunatly no bending before flower if more than 4 plants.
after the 2 grows I got going at the moment I will be consentraiting on fewer plants all bent over and tied down
I am still looking for this setup, I can't remember where I saw it ; RDWC that fills from the bottom and returns threw a top line. Has any one seen or run something like this.

 

[mcloadie]

Nice pothound lurch!, I'm subd!

 

[Lurch Farmer]

the remodel:
no light leeaks into flower room

the ladies of the second grow in this room

still waiting to see if they are females before I tie them down

2 left overs and the pain in my grow autos

3x6 think they will over flow into the 3rd area that is waiting for a light

the 3rd space

small work space or 4th flower area?

 

[mcloadie]

Lookin good lurch, Your spaces have super potential. Alot of advantages to having multiple spaces and rooms to work in! + reps