Re: Advanced Nutrients - Nutrient Calculator Help!?
I had same problem I emailed AN and got this response.
Thank you for your inquiry,
Here is a relatively simple version of the feeding chart that includes a number of our supplements and additives, while still giving you great results and yields. Let me know if there is anything else I can add or if this is sufficient.
Vegetative growth
We do not recommend applying any nutrients until your plants have developed 3-4 sets of new or true leafs if grown from clones or seedlings. Also, if growing in amended soil, do not apply any nutrients until the plants have used up all the nutrients supplied by the soil. Having said that, here is what we suggest:
Until they develop 3 or 4 sets of new (clones)/true (seedlings) leaves feed them only water. You can foliar spray them with Jumpstart, use application rate suggested on the bottle or 1/4 strength B-52 (1 mL/liter) until then. You can also add 1/4 strength applications of Piranha, Tarantula or Voodoo Juice, to the water that you will use in the root zone.
Clones seedlings need high levels of moisture in the medium
(80% -85% is good 100% is too much)
They also like a warmer environment in the root zone 70 F – 80 F.
Week 1 – 300 ppm: GMB @ 0.5ml/L of each in a 1-1-1 ratio (1.5 ml in total per liter) + Foliar spray B-52 once per week at the 2ml/L application rate.
Week 2 – 600 ppm: GMB @ 1.0ml/L of each in a 1-1-1 ratio + Foliar spray B-52.
Week 3 – 900 ppm: GMB @ 2.0ml/L of Grow, 2.0ml/L Micro and 0.4ml/L Bloom in a 10-10-1 ratio (4.4ml in total per liter) + Voodoo Juice at the rate of 2ml/L + Foliar spray B-52.
Week 4 – 1200 ppm: GMB @ 2.5ml/L of Grow, 2.5ml/L Micro and 0.5ml/L Bloom in a 10-10-1 ratio (5.5ml in total per liter) + Voodoo Juice + Foliar spray B-52.
If it is necessary to veg your plants for a longer period of time then 4 weeks, continue with the 4th week application rates. Apply voodoo juice for up to three week in a row, to properly inoculate the root zone, after which, you can discontinue the application. Also, we recommend growing your plants in veg until they are about 1/3 of their final finish height, since the plants will put on anywhere from 1/2 - 2/3 more vertical growth in the bloom stage. That is, if you want to finish your plants at 6 feet tall, veg until they are 2 foot.
Flower Production Stage
Week 1 – 1000 ppm: GMB @ 1.82 ml/L each in a 1-1-1 ratio (5.46 ml in total per liter)
Week 2 – 1200 ppm: GMB @ 2.27 ml/L each in a 1-1-1 ratio
Week 3 – 1400 ppm: GMB @ 2.70 ml/L each in a 1-1-1 ratio
Week 4 - 1600 ppm: GMB @ 3.33 ml/L each in a 1-1-1 ratio
Week 5 – 1400 ppm: GMB @ 2.70 ml/L each in a 1-1-1 ratio
Week 6 – 1200 ppm: GMB @ 2.27 ml/L each in a 1-1-1 ratio
Week 7 – Flush!
If plant needs longer than 6 weeks of feeding (7 week strain, the 7th week is a flush week), repeat week 4 for each extra week.
Overfeeding
If the very tip of the leaves get yellow, it is an early sign of overfeeding. Reduce the solution strength slightly (100 – 150 ppm), if not increase slightly.
Deficiencies
If the margins or any other part of the leaves yellows off it is a possible sign of deficiencies. Check pH in medium and reservoir, if the pH is off from the ideal levels lock out conditions may develop. At first symptom of a deficiency apply rule # 1: “When in doubt flush them out.”
If growing in a medium that takes some time to dry up, allow the medium to dry and feeding them plain pH adjusted water when they are ready, rule #2: “Don’t apply until it’s dry.” If growing in a re circulating system, find a way to give them only pH adjusted water for the length of a light cycle, a second reservoir just for water may be a simple solution, then it is just a matter of moving the pump over, maintain the regular water pump cycle during the flush.
pH conditions in medium
In Soil/Soiless (Soil or Soiless mixtures that may also contain peat moss but not Coco Coir) adjust the pH to 6.3
In Hydro (It includes products such as Rockwool, Hydroton Rock, and Lava Rock) adjust to 5.6
In Coco Coir adjust the ph to 5.8 – 6.0. You may want to supplement with SensiCal when growing in coco with a base nutrient that in not specific to growing in coco
Root damage
Another possibility is damage in the root zone, check for the possibility of root rot, or insect larvae as potential causes for root deterioration, brown, mushy, smelly roots are a good indicator of root damage. Hydrogen peroxide is an efficient way to destroy root rot causing bacteria.
Mixing instructions
When mixing your reservoir, always mix the product that has the highest nitrogen content first (the first number on the NPK rating.) This will more often then not, be your base nutrients. Make sure you properly dissolve each product before mixing the next one into your reservoir. After adding everything into the reservoir, allow the solution to sit for at least 1-2 hours. This will allow the pH to stabilize, making it easier to adjust. Once the pH is stabilized, measure it, and adjust according to the medium you are growing in.
When using a re circulating system, you will be dealing with one of two situations, either the reservoir is large enough to feed the plants for a week without the need to be topped up during the week or it is a small reservoir and in order to feed the plants through the week it will require to be topped up.
In case of reservoir that does not need to be topped up.
Add to the reservoir the amount of water that the plants are going to be using for the week, include some extra water to allow for evaporation.
Mix the nutrient solution at 1/6th of the strength that is suggested in the calculator for that week.
Example: If the plants need 1200 ppm for the week, divide 1200 by 6 and mix the reservoir at 200 – 250 ppm.
Allow the solution to sit long enough to stabilize the pH. Adjust pH
Feed the plants.
Allow the plants to feed on the solution and the pH to rise for 1 1/2 – 2 days before re adjusting the pH.
In case of reservoir that needs to be topped up with water during the week.
Add to reservoir the amount of water that the plants will use in 3 – 3 ½ days.
Mix the nutrient solution at the strength that is suggested in the calculator for that week.
Allow the solution to sit long enough to stabilize the pH. Adjust pH
Feed the plants
Allow the plants to feed on the solution for 1 1/2 – 2 days, top up with water to the original level first before re adjusting the pH, after adding the water allow solution to sit for an hour and re adjust the pH.
If growing in soil adjust the pH 6.3, in coco 5.8 – 6.0, in hydro 5.6.
When using a re circulating system having the pH rise after you start feeding the plants is a good thing, It means that the plants are up taking nutrient, it is important that it rises the plants up take different nutrients at different pH levels, allow the pH to rise for 1 ½ - 2 days at that point adjust the pH down to 5.6 again
Nutrient Calculator, Hydroponics nutrient calculator
Measurements:
1 gallon = 4 liters (quarts)
1 tsp (teaspoon) = 5 mL
1/2 tsp (teaspoon) = 2.5 mL
1/4 tsp (teaspoon) = 1.25 mL
1 tbsp (tablespoon) = 3 tsp (teaspoon) = 15 mL
We use a 700 ppm/uS/m scale or a 0.7 scale to convert from EC to ppm.
to you all for replies to this thread
