basementdwell
New Member
whats wrong with my leaves/plant
- Thread starter basementdwell
- Start date
herbsnbuds
New Member
They are diseased. Remove all diseased leaves immediately! Look up Cannabis Diseases on Google!
- Thread starter
- #3
basementdwell
New Member
here she is now
herbsnbuds
New Member
SnowBender
New Member
- Thread starter
- #6
basementdwell
New Member
What Strain is it? -Barneys farm Acapulco Gold
Is it Indica, Sativa or Hybrid? What percentages? sativa dom
How Many Plants? 2
Is it in Vegetative or Flowering Stage? 1st 1 month, 2nd 21/2 wks (24/0)
If in Flowering Stage... How Long? NA
Indoor or Outdoor? indoor
Soil or Hydro?hydro
If Hydro, Reservoir size?1 gal
If Hydro, Reservoir Temperature?76-78
If Hydro, what type of Medium?aero garden sponge> hydroton
If Hydro, what type of Setup? aero garden>to Dwc
If Soil... What is in your Mix?
If Soil... What Size Pot?
Size (Wattage) of Light? How Many? aerogarden elite 3 CFls > to 100 wt MH and veg/bud MH 250wt HPS
Is it Air Cooled? enclosed flood (? remote ballist )
Temperature of Room/Cabinet? 76 ac cooled
RH of Room/Cabinet? 50-60%
PH of Medium or Reservoir? 1st 6/8 after flush and distilled 6.0
Any Pests? NA
How Often are you Watering?
Type and Strength of Fertilizers used? aero garden > ordering General Hydroponics micro/ grow/ and bloom also getting American Agritech - Cal-Mag Plus
Size or Square Footage of Room? open > to 4x6x10
ok well this is my first post here. so where to start i am using a aero garden, growing barneys farms Acapulco Gold from seeds. my first plant is doing great about 7" high with it 3rd set of 5 coming out about a month old, i have not toped it yet. I wanted to let the 4th node come out and get a little growth out of it, so i can try and clone it. So it 3 wks old just did first reservoir change cause i use the tablets fert that came with the aerogarden and i started to see a little nute burn and i also used my tap water and it had ph of 6.8 and it real hard, but i read thats not good for the plants. So i did reservoir change and I used distill h20 and a liquid fert from ag but only 1/2 strength of it.
Any how so i was reading yesterday, when using distilled h20 u have to use cal mag supplements. Well i am getting some yellowing of the older fan leave and kinda of a motted look to the next set up fan leave, is this due to a cal/mag deficency ?? the newest growth doesnt have and look to it yet since doing the reservoir change. I wanted to have two moms, so i grew a second seedling and this one i put tad rooting harmone on the tap root and then into the ag seed pod sponge. Its on it 1st set of 5 fan leaves and 3wks old and i noticed a little brusing at the sponge root/ stem line. I am assuming the sponge was riding up to high and starting to rot the stem out, so i removed about a 3/8" of the top of the sponge. Hoping the rot will stop and grow over but its growth compared the the first one is appearing slower. Is there anything i can do to help my little girl out ?? Could i cut the stem and try and root it again ?? i plan to move them into a net pot and hydroton and go dwc with air pump & stone, and h2o pump, misters and sprayers. Just got to finish my grow room up. i have plans to do a flood table and reservoir, but in there i will go to a 100 watt MH flood. I am ordering General Hydroponics micro/ grow/ and bloom also getting American Agritech - Cal-Mag Plus. should i get any thing else as far as any root additives for the reservoir or bud enhancers i only got 2 seeds left and want to have a decent harvest this fall =) my fiancee and i are expecting out first in Nov and i want to have some superdooper to celebrate with. this is my second grow inside, first with hydro/bubbles =) Ps, I have a 250watt hps that i will start combining with the MH to Veg/ flower under. barneys says 70 - 75 Days to flower so when do i start 12/12 ? i am running my aero lights 24/0 / H20 temp is 78/ Ph is now 6.0 . I do want to veg the first one out and take some clones for my next harvest but i do plan to budd my mom this cycle too.
Is it Indica, Sativa or Hybrid? What percentages? sativa dom
How Many Plants? 2
Is it in Vegetative or Flowering Stage? 1st 1 month, 2nd 21/2 wks (24/0)
If in Flowering Stage... How Long? NA
Indoor or Outdoor? indoor
Soil or Hydro?hydro
If Hydro, Reservoir size?1 gal
If Hydro, Reservoir Temperature?76-78
If Hydro, what type of Medium?aero garden sponge> hydroton
If Hydro, what type of Setup? aero garden>to Dwc
If Soil... What is in your Mix?
If Soil... What Size Pot?
Size (Wattage) of Light? How Many? aerogarden elite 3 CFls > to 100 wt MH and veg/bud MH 250wt HPS
Is it Air Cooled? enclosed flood (? remote ballist )
Temperature of Room/Cabinet? 76 ac cooled
RH of Room/Cabinet? 50-60%
PH of Medium or Reservoir? 1st 6/8 after flush and distilled 6.0
Any Pests? NA
How Often are you Watering?
Type and Strength of Fertilizers used? aero garden > ordering General Hydroponics micro/ grow/ and bloom also getting American Agritech - Cal-Mag Plus
Size or Square Footage of Room? open > to 4x6x10
ok well this is my first post here. so where to start i am using a aero garden, growing barneys farms Acapulco Gold from seeds. my first plant is doing great about 7" high with it 3rd set of 5 coming out about a month old, i have not toped it yet. I wanted to let the 4th node come out and get a little growth out of it, so i can try and clone it. So it 3 wks old just did first reservoir change cause i use the tablets fert that came with the aerogarden and i started to see a little nute burn and i also used my tap water and it had ph of 6.8 and it real hard, but i read thats not good for the plants. So i did reservoir change and I used distill h20 and a liquid fert from ag but only 1/2 strength of it.
Any how so i was reading yesterday, when using distilled h20 u have to use cal mag supplements. Well i am getting some yellowing of the older fan leave and kinda of a motted look to the next set up fan leave, is this due to a cal/mag deficency ?? the newest growth doesnt have and look to it yet since doing the reservoir change. I wanted to have two moms, so i grew a second seedling and this one i put tad rooting harmone on the tap root and then into the ag seed pod sponge. Its on it 1st set of 5 fan leaves and 3wks old and i noticed a little brusing at the sponge root/ stem line. I am assuming the sponge was riding up to high and starting to rot the stem out, so i removed about a 3/8" of the top of the sponge. Hoping the rot will stop and grow over but its growth compared the the first one is appearing slower. Is there anything i can do to help my little girl out ?? Could i cut the stem and try and root it again ?? i plan to move them into a net pot and hydroton and go dwc with air pump & stone, and h2o pump, misters and sprayers. Just got to finish my grow room up. i have plans to do a flood table and reservoir, but in there i will go to a 100 watt MH flood. I am ordering General Hydroponics micro/ grow/ and bloom also getting American Agritech - Cal-Mag Plus. should i get any thing else as far as any root additives for the reservoir or bud enhancers i only got 2 seeds left and want to have a decent harvest this fall =) my fiancee and i are expecting out first in Nov and i want to have some superdooper to celebrate with. this is my second grow inside, first with hydro/bubbles =) Ps, I have a 250watt hps that i will start combining with the MH to Veg/ flower under. barneys says 70 - 75 Days to flower so when do i start 12/12 ? i am running my aero lights 24/0 / H20 temp is 78/ Ph is now 6.0 . I do want to veg the first one out and take some clones for my next harvest but i do plan to budd my mom this cycle too.
- Thread starter
- #7
basementdwell
New Member
My new to me water chiller just need to make some modifications and i ll have 40f chiller coild just have to find some of that stiff pvc tubing and wrap it into a coil and install it to the water cooler coil and if i need i can rig up the heat section too. Best part is i saw it @ the end of a neighbors drive way
now i can get my temp down to where they should. my roots are gonna take off and now just need to get my exhaust going and my new room is gonna be killer =) and to think i almost bought a chiller today now i gotta rig up a thermostat to a pump. Do you think i shoud just fill the old resv from the cooler with water ?? or put thermo compound between the coil and the pvc tubing ?? my only concern is stagnant water in my grow =( thats asking for truble. I tried to seperate the coil from the resvoir but i think they epoxy it togather. i figured i would coil my tubing on the inside and the ouside. but if i could coil it in the resvoir and have some kinda temp transfer ,liquid, gel, ??? IDK. It would help any ideas ?? 
