mojuan
Well-Known Member
I have all these T's and elbows and I'm lost. 6 outlets on the brain bucket go to? The furthest bucket or the closest bucket. And where do I put the T' and elbows. The 3 against the wall are the inserts
Set up ebb and flow pots
- Thread starter mojuan
- Start date
It looks like a 5 string X 3 bucket setup.
- 5 elbows (with strainers) are for the last buckets in a string
- 10 tees (with strainers) are for the remaining buckets
Are there separate feeds for each string from the 'brain bucket'?
Are there more parts such tees or crosses?
Ebb & Flow Layout
- 5 elbows (with strainers) are for the last buckets in a string
- 10 tees (with strainers) are for the remaining buckets
Are there separate feeds for each string from the 'brain bucket'?
Are there more parts such tees or crosses?
Ebb & Flow Layout
- Thread starter
- #3
mojuan
Well-Known Member
No crosses, and the 1's by the wall are the strainers, thanks salt, getting excited
These are the strainers I mentioned:
Each outlet from the brain bucket probably services two buckets. I suggest laying the parts out on the floor with the buckets. If you want, use painter's tape to simulate the water lines to ensure you get it right the first time. Cutting the line is easy. joining pieces together is a pain.
You may end up with three loops of brain(elbow) - 4 X buckets (tees) - brain(elbow)
Each outlet from the brain bucket probably services two buckets. I suggest laying the parts out on the floor with the buckets. If you want, use painter's tape to simulate the water lines to ensure you get it right the first time. Cutting the line is easy. joining pieces together is a pain.
You may end up with three loops of brain(elbow) - 4 X buckets (tees) - brain(elbow)
- Thread starter
- #5
mojuan
Well-Known Member
I did that, I couldn't get the concept till I could see it.
Killer looking set up I’ll sit back n watch u assemble it what’s straines u goin to b running
- Thread starter
- #7
mojuan
Well-Known Member
Not there yet lol after a few test runs I need lights, trying to stay on a budget, so I'm shopping around.
I’m running with mars for the price can’t really beat it so far I’m impressed
- Thread starter
- #9
mojuan
Well-Known Member
Need more hose, so tomorrow I'll be at the store, fun fun
- Thread starter
- #10
mojuan
Well-Known Member
May I ask which 1's , I'm looking at daizey chaining 3 sp250 x 2= 6 lights or 4 TSW2000 but I can't daisy chain them.
I’ll go with the SP-250 I’m running the ts 3000 def bright also but can’t link up also but I’m shure the 250 would look so nice under that setup
- Thread starter
- #12
mojuan
Well-Known Member
Yeah I agree n those lights will last u a life time
