New guy

[Nfs]

Hey guys I am new to the forum and I start to grow I am still new to all this .
I would love to learn more and contribute as much as I can. Thank you

 

[Hydroholic]

Hey guys I am new to the forum and I start to grow I am still new to all this .
I would love to learn more and contribute as much as I can. Thank you

Welcome to the site. Plenty of good information here.

 

[Tomuk17]

Welcome to 420 Community, you will learn plenty of these wonderful people on here so friendly and knowledgeable happy growing

 

[Nfs]

Thank you guys I am excited to learn from the bests. I already posted a question and I got a respond fast to help me resolve the issue. I hope I can resolve my cannabis issues soon before they die

 

[StoneOtter]

Welcome Nfs, show us some pics and tell us what you've done so far.

 

[Backlipslide]

Welcome to

 

[Nfs]

Welcome Nfs, show us some pics and tell us what you've done so far.

I got a grow tint with 2 1000 leds, big 4” intake to exit outside ,
A booster fan that pushes fresh air inside , humidifier and heater that is programmable so it kick in when needed automatically and here are the results. They are growing pretty well. Just going thro some nutes problems and stuff the booster fan makes the tint poofy cus it filled with air is that good or is that too much air?

 

[StoneOtter]

They look nice and healthy. One of my tents blows out like that until I need to cycle lots of air out with the exhaust fan. It keeps the tent from rubbing on the plants when it's puffed out.

 

[AdaminCO]

You can purchase a variable speed switch for the booster so you can balance it out.
I have them on both fans actually.
They're only like 10-15$.
Here’s the one I use... plugs directly into the bottom.

 

[Nfs]

You can purchase a variable speed switch for the booster so you can balance it out.
I have them on both fans actually.
They're only like 10-15$.
Here’s the one I use... plugs directly into the bottom.

I have this but when I put it on medium it start to suck the tint inside and rubbing on plants and doesn’t allow good air movement inside and when I put it on low it gets really hot in there cus it’s not sucking enough so I decided to put a booster fan on one of tint holes and now the tint if poofy lol
Even when then intake on high it still poofy with the booster fan lol so is that bad for the tint or plants that too much air there?

 

[AdaminCO]

I have this but when I put it on medium it start to suck the tint inside and rubbing on plants and doesn’t allow good air movement inside and when I put it on low it gets really hot in there cus it’s not sucking enough so I decided to put a booster fan on one of tint holes and now the tint if poofy lol
Even when then intake on high it still poofy with the booster fan lol so is that bad for the tint or plants that too much air there?

Just because you push air in, doesn’t mean you’re getting more airflow. It’s sounds like your exhaust isn’t pulling enough out. Does your tent have vent windows at the bottom?

 

[AdaminCO]

I don’t think you have this setup properly. Why is your filter outside the tent?

 

[Nfs]

Just because you push air in, doesn’t mean you’re getting more airflow. It’s sounds like your exhaust isn’t pulling enough out. Does your tent have vent windows at the bottom?

I had the filter inside the tech but with humidity and stuff is start to get glocked, so I moved it outside and its doing much better instead of sucking the air directly from the filter it goes through the tube and exit from the filter same job but doesn't get blocked. and yes my tint have little vents windows on the side and I have them both open now and the air coming out of them but the tint still poofy

 

[AdaminCO]

Open your bottom vent holes...

Hang the filter up high to pull the hot air out of your tent..(hot air rises)

Run it out of the top... My booster fan is where the black strap is.

Then I have the turbine fan also pulling the filtered air out, at the end of the duct...

Cool air comes in from the bottom floor vent door (I have all three open)... flows through your plants (I have two fans pushing the air upward)... then gets filtered out through the exhaust. See the rear and side vents are pulling lower cold air in.

 

[Nfs]

Open your bottom vent holes...

Hang the filter up high to pull the hot air out of your tent..(hot air rises)

Run it out of the top... My booster fan is where the black strap is.

Then I have the turbine fan also pulling the filtered air out, at the end of the duct...

Cool air comes in from the bottom floor vent door (I have all three open)... flows through your plants (I have two fans pushing the air upward)... then gets filtered out through the exhaust. See the rear and side vents are pulling lower cold air in.

well can I leave the filter where it is it still pulls the air out. I just dont know why each time I put it inside it get blocked and stop sucking air well. also why you have ur boost fan there? the booster fan to boost sucking the air out or to put air in the tint?

 

[Nfs]

Open your bottom vent holes...

Hang the filter up high to pull the hot air out of your tent..(hot air rises)

Run it out of the top... My booster fan is where the black strap is.

Then I have the turbine fan also pulling the filtered air out, at the end of the duct...

Cool air comes in from the bottom floor vent door (I have all three open)... flows through your plants (I have two fans pushing the air upward)... then gets filtered out through the exhaust. See the rear and side vents are pulling lower cold air in.

also I am afraid if I opened the vents the smell will sneak out. I dont want the room to smell

 

[AdaminCO]

well can I leave the filter where it is it still pulls the air out. I just dont know why each time I put it inside it get blocked and stop sucking air well. also why you have ur boost fan there? the booster fan to boost sucking the air out or to put air in the tint?

You shouldn’t have anything pushing air in.
Hang the filter above your light, put the booster fan in the middle of the duct, and the turbine fan at the end.

 

[AdaminCO]

also I am afraid if I opened the vents the smell will sneak out. I dont want the room to smell

That’s the point of having the filter in your tent dude. Lol.

 

[Nfs]

OHHHHHHH....I didn't know the booster goes between the turbine and the filter, but my turbine is not as strong as the booster so the booster will basically be a strong fan to absorb and make the air filter suck more air out right?

 

[Nfs]

but also dont forget that my tint without the booster fan get sucked in and start touching the plants, but thats maybe cus I didn't have the side windows open?? and now that I have them open it won't. and when I leave them open won't that make the tint way colder inside and also let humidity escape??