Mars-Hydro LED Grow Light Discussion

db003 said:
green crack popcorn buds and trim infused coconut oil with soy lecithin I decarboxylated the buds and trim in a Pyrex dish coved with foil for 30 minutes in the oven on low then put it in my little crock pot with 2 tsp. of soy lecithin on low for 3 hours and strained with cheese cloth cooled in the fridge now to make some brownies and mix some with some honey for my morning toast the oil is a little on the dark side because I used water leafs too but I don't care it still smells great

020470.JPG
Click to expand...

Ver nice DB!!! Two things. Use sunflower lecithin instead of soy to boost bioavailability. There are some issues with soy. Second, check out the Magical Butter Machine!!! It is awesome! :peace:
 
db003 said:
it is now official I have competed my first grow! I just harvested my last plant of my first grow the Larry og Kush this morning and I just started my second grow this afternoon this time I will be growing Martian Kush clone by dna genetics I will be vegging under a mars II 400 and flowering under a mars II 700

if you would like to see my next grow you can click on the link in my signature

to my surprise my Larry og Kush had some purple leafs

pics from the harvest
:thumb:

0042138.JPG
:thumb:
0032276.JPG
:thumb:
0061784.JPG
:thumb:
016676.JPG
:thumb:
018552.JPG
:thumb:
0111072.JPG
Click to expand...
:thumb:
 
awesome job DB, be carefull with the edibles haha the first time i had them i didnt realize how much more intense the high could be :lot-o-toke: i felt really uncomfortable
 
It's said soy will grow ya a nice rack of boobs if that's yer thing

lol

Joking here , flame ease where the burn ?
 
Hi Sara; I'm thinking about LEDs but am on a budget..
Do you have a dealer in Australia? Found some on ebay, store name marshydro-au. Is this a legit ebay seller?
Anywhere else I can order for best price?
Thanks for any help..
 
Sweet cheers for that will check it out. Might not be buying for a few more weeks; still thinking about it... Want to upgrade from CFL but dont want the heat issues so LED obvious choice...
Still thinkin... :thumb:
 
santb said:
Sweet cheers for that will check it out. Might not be buying for a few more weeks; still thinking about it... Want to upgrade from CFL but dont want the heat issues so LED obvious choice...
Still thinkin... :thumb:
Click to expand...

No problem, Sara should be around Mon-Fri for more info on sites. I do not know other places to buy them. Have a good weekend.
 
Sweet cheers guys. was a bit worried about some of the cheapies on fleabay but these Mars seem legit and are more within my price range....
Ta!
 
The Ganja Girls soaking up the Mars-Hydro Sun Series rays on this lovely Sunday morning.
thumb_IMG_1002_1024.jpg

thumb_IMG_1001_1024.jpg

thumb_IMG_0997_1024.jpg

thumb_IMG_0994_1024.jpg

thumb_IMG_0998_1024.jpg

thumb_IMG_0999_1024.jpg

thumb_IMG_0993_1024.jpg


Have a Great Day everyone!!
 
Hey Santb if you use the code CoFinest at checkout on the MarsHydro website you will also receive a 3% discount :thumb:

Nice butter there db003 :thumb:

Thanks for pointing out the Magical Butter Supergroomer, looks like the ideal tool for a newbie butter maker such as myself. It's on my wish list :thumb:

Looking sweet as ever there UncleCannabis, a fine sight to wake up to :thumb:
 
Kriaze said:
Hey Santb if you use the code CoFinest at checkout on the MarsHydro website you will also receive a 3% discount :thumb:

Nice butter there db003 :thumb:

Thanks for pointing out the Magical Butter Supergroomer, looks like the ideal tool for a newbie butter maker such as myself. It's on my wish list :thumb:

Looking sweet as ever there UncleCannabis, a fine sight to wake up to :thumb:
Click to expand...

PM Sent.
 
Ha, as the representative of company, I would say, it's inappropriate to take the risk.:Namaste: While, a fan of mechanic, I couldn't resist to have a try with this thorough explanation. Note: Do that at your own RISK and note that opening might void warranty!:cheesygrinsmiley::cheesygrinsmiley:
flexy123 said:
Today I noticed a slight smeary "film" on the glass (inside) of the old model marshydros. I didn't really want to *remove* the glass altogether as some people do, but I opened the lights up and cleaned the glass with glass cleaner and then with some alcohol. Just *careful* when you remove the housing and then take out the PCB with the LEDs and the heatsink. Otherwise it was very easy to do this. Just wanted to report :)

*** Do that at your own RISK and note that opening might void warranty!!! ***

Unplug
Put lamp face down on some desk with a soft towel etc.
Unscrew the 6 screws at the side.
Carefully lift up/out the upper part of the case.
(Make note of the attached wires!)
You see the heatsink and there are four more tiny screws.
Unscrew the 4 screws and careful lift up and take out the PCB
(Make note of the attached wires here too)
Click to expand...
 
:thumb:Nice shot! Remind me of the bar. The plant looks like dancing under the dazzling light. :circle-of-love:
kelticBlue said:
Hi Sara !
An update on my light. Took about a week for the plant to adjust to the new LED. Seem to be bulking bigger more than growing at first. Now it is growing up and out. It is about 3 weeks into flower. I was having fun and shot from the underneath to see the light in the picture.
It is the Reflector LED 96x3W.
have a ...Grate Day...

CIMG8721.jpg
Click to expand...
 
Thank you, indochronic, it's so great to have you help us. :Namaste:
indochronic said:
In the process on getting MarsHydro stocked in Ireland for anyone that may be usefull too :)
Click to expand...
 
Back
Top Bottom