Kushy Keef
New Member
Hey gang, I invite you all to follow my progress and I welcome all the input that this community can offer.
First I would like to let everyone know this is my first indoor grow and my only other previous experience was with soil (no pH or special nutes) and that was long ago. Now that I have the space and time for this I'll be going for a DWC/RDWC Drip system (drip only for first few weeks) and the possibility of a low pressure aeroponic/DWC hybrid for the flowering stage. Lastly, I'm certain this sounds a little ambitious for a first time indoor hydro setup but I have spent the better part of the last few moths reading and studying on here and everywhere else
Gear:
lights
- 1000w MH/HPS digital ballast and bulbs (6500k & 2700k), ballast dimmable to 50%, 75% and 100%
- XXL 24X22 air cooled/glass sealed reflector hood
Cooling/Air
- 240 CFM duct fans, 3 EA
- 25ft 6" reflective ducting
- A/C fed inline air source
- Digital temp & humidity monitor
- large piston 4 way air pump/ 2 EA
- 25ft clear air tubing
- 1inch air stones, 8EA
- 6 inch air stone
Hydro
- 5 gallon buckets, 10 EA
- 1/2 irrigation tubing for draining
- 1/4 drip feed lines to ring attachments, 4 EA
- 1 dozen 1/4 tube plug spray nozzles for aeroponic option
- 390 GPH water pump
- 4 way 1/4 line manifold for drip/spray
- Hydroten growing media
- Rockwool starting blocks (self cut to 1X1 for germinating)
Nutrition & Water
- GH flora 3 part series
- GH pH up & down
- GH pH test kit (liquid) - digital meter on order*
- Distilled water for first few weeks then RO
Misc
- Timer, 15 min intervals
- Heavy duty light hangers
- 4X4 grow tent (amazon, $150'ish)
Pictures of my gear will be up shortly (reading about "how to" right now).
Stay happy,
Kushy
First I would like to let everyone know this is my first indoor grow and my only other previous experience was with soil (no pH or special nutes) and that was long ago. Now that I have the space and time for this I'll be going for a DWC/RDWC Drip system (drip only for first few weeks) and the possibility of a low pressure aeroponic/DWC hybrid for the flowering stage. Lastly, I'm certain this sounds a little ambitious for a first time indoor hydro setup but I have spent the better part of the last few moths reading and studying on here and everywhere else
Gear:
lights
- 1000w MH/HPS digital ballast and bulbs (6500k & 2700k), ballast dimmable to 50%, 75% and 100%
- XXL 24X22 air cooled/glass sealed reflector hood
Cooling/Air
- 240 CFM duct fans, 3 EA
- 25ft 6" reflective ducting
- A/C fed inline air source
- Digital temp & humidity monitor
- large piston 4 way air pump/ 2 EA
- 25ft clear air tubing
- 1inch air stones, 8EA
- 6 inch air stone
Hydro
- 5 gallon buckets, 10 EA
- 1/2 irrigation tubing for draining
- 1/4 drip feed lines to ring attachments, 4 EA
- 1 dozen 1/4 tube plug spray nozzles for aeroponic option
- 390 GPH water pump
- 4 way 1/4 line manifold for drip/spray
- Hydroten growing media
- Rockwool starting blocks (self cut to 1X1 for germinating)
Nutrition & Water
- GH flora 3 part series
- GH pH up & down
- GH pH test kit (liquid) - digital meter on order*
- Distilled water for first few weeks then RO
Misc
- Timer, 15 min intervals
- Heavy duty light hangers
- 4X4 grow tent (amazon, $150'ish)
Pictures of my gear will be up shortly (reading about "how to" right now).
Stay happy,
Kushy