Fast Flowering OGKZ Grow Journal 7/16/2021

[Koolbudz]

Strain - Fast Flowering OGKZ (5)

Room - 8 x10 covered in Panda Film

Grow Media - Happy Frog, Ocean Forest, Kellogs Organic, Natures Care Organic Potting Mix (Mixture of these soils with 50% Perlite added)

Planter - 4ft x 8ft Cloth Raised Bed Planter

Clone lighting - WeeGrow Led Strip

Cloner - Clone King 36 place

Cloning aids - Clonex Rooting Gel and Clonex solution

Veg and Flower Lights - Two 1000w Vivosun HID's (both MH and HPS) w/Vented Hoods

Heating - Oil filled Electric Radiator

Cooling - 10k BTU Window AC

Humidity - Three ultrasonic table top humidifiers

Dehumidification - 70pt dehumidifier with drain pump

Air Circulation - 16" oscillating pedestal fan, two small squirrel cage fans, AC Infinity 6" (for hoods)

Nutrients - Amended soil with Expert Gardner Organic Plant Food, Nectar Herculean Harvest, Molasses, Photo Plus (Not All Used Each Grow)

July 14 2021 is when cuttings were taken from my OGKZ currently in grow about to switch 12/12

Cuttings were cut at 45's, dipped in Clonex Gel and went into cloner filled with Clonex solution per directions.
For the first 24 hrs cuttings were under a 4ft dual led shop light rated @ 5000lumen/5000Kelvin placed at a height to achieve around 2500 lux (tested using Android App 'Lux Light Meter Free' by Doggo Apps).

After initial 24 hrs under the shop light my little led from WeeGrow arrived so the 4ft shop light went back into a corner and I set up the little LED on top of the Cloner

Here is where we are as of 07/16/2021

 

[Bill284]

Strain - Fast Flowering OGKZ (5)

Room - 8 x10 covered in Panda Film

Grow Media - Happy Frog, Ocean Forest, Kellogs Organic, Natures Care Organic Potting Mix (Mixture of these soils with 50% Perlite added)

Planter - 4ft x 8ft Cloth Raised Bed Planter

Clone lighting - WeeGrow Led Strip

Cloner - Clone King 36 place

Cloning aids - Clonex Rooting Gel and Clonex solution

Veg and Flower Lights - Two 1000w Vivosun HID's (both MH and HPS) w/Vented Hoods

Heating - Oil filled Electric Radiator

Cooling - 10k BTU Window AC

Humidity - Three ultrasonic table top humidifiers

Dehumidification - 70pt dehumidifier with drain pump

Air Circulation - 16" oscillating pedestal fan, two small squirrel cage fans, AC Infinity 6" (for hoods)

Nutrients - Amended soil with Expert Gardner Organic Plant Food, Nectar Herculean Harvest, Molasses, Photo Plus (Not All Used Each Grow)

July 14 2021 is when cuttings were taken from my OGKZ currently in grow about to switch 12/12

Cuttings were cut at 45's, dipped in Clonex Gel and went into cloner filled with Clonex solution per directions.
For the first 24 hrs cuttings were under a 4ft dual led shop light rated @ 5000lumen/5000Kelvin placed at a height to achieve around 2500 lux (tested using Android App 'Lux Light Meter Free' by Doggo Apps).

After initial 24 hrs under the shop light my little led from WeeGrow arrived so the 4ft shop light went back into a corner and I set up the little LED on top of the Cloner

Here is where we are as of 07/16/2021

Hey Amigo can I pull up a chair?
Bill

 

[Koolbudz]

Always welcome where I go Bill...

 

[Koolbudz]

Strain - Fast Flowering OGKZ (5)

Room - 8 x10 covered in Panda Film

Grow Media - Happy Frog, Ocean Forest, Kellogs Organic, Natures Care Organic Potting Mix (Mixture of these soils with 50% Perlite added)

Planter - 4ft x 8ft Cloth Raised Bed Planter

Clone lighting - WeeGrow Led Strip

Cloner - Clone King 36 place

Cloning aids - Clonex Rooting Gel and Clonex solution

Veg and Flower Lights - Two 1000w Vivosun HID's (both MH and HPS) w/Vented Hoods

Heating - Oil filled Electric Radiator

Cooling - 10k BTU Window AC

Humidity - Three ultrasonic table top humidifiers

Dehumidification - 70pt dehumidifier with drain pump

Air Circulation - 16" oscillating pedestal fan, two small squirrel cage fans, AC Infinity 6" (for hoods)

Nutrients - Amended soil with Expert Gardner Organic Plant Food, Nectar Herculean Harvest, Molasses, Photo Plus (Not All Used Each Grow)

July 14 2021 is when cuttings were taken from my OGKZ currently in grow about to switch 12/12

Cuttings were cut at 45's, dipped in Clonex Gel and went into cloner filled with Clonex solution per directions.
For the first 24 hrs cuttings were under a 4ft dual led shop light rated @ 5000lumen/5000Kelvin placed at a height to achieve around 2500 lux (tested using Android App 'Lux Light Meter Free' by Doggo Apps).

After initial 24 hrs under the shop light my little led from WeeGrow arrived so the 4ft shop light went back into a corner and I set up the little LED on top of the Cloner

Here is where we are as of 07/16/2021

I FORGOT -----

FOR MY GROW MEDIA I ALSO USED PROMIX HP IN MY MIX

 

[Koolbudz]

Update 7/23/2021

Clones have rooted, it took 9 days, with a 100% success rate on the roots.

I transplanted them into Solo cups with a basic organic potting mix with a lot of Perlite mixed in.

I tend to over water plants when they are real young like this so I added more Perlite to help drainage.

The clones were placed into me cheapy DIY tote/humidity dome which honestly works great (walmart - both are bottoms, one fit perfectly upside down in the other and cost under $20). My little WeeGrow light went up on top with about 5 to 6" or so between plant and light.

Due to only having one room for plants I may run into a problem with timing so these may not go in the room as soon as I would like but lets see what happens, ya never know what can happen.

<since this post I had to put the WeeGrow light inside the humidity dome because too much light was blocked by the frosted area on the lid. Current height from the shortest plant is 9" and if I remember 1100ish on lux - lacking for me so I will be thinking of what to do will update again with my fix>