fanleaf
Well-Known Member
Well, I haven't been able to grow for the last little while due to my grow area being used for other purposes. That's about to change though. My old grow area was only about 3.8 feet X 3.5 Feet X 7 foot tall.
I decided to invest in some supplies and put myself to work. The new grow room is almost 6 feet wide by 7 feet long by 6.5 foot ceiling.
It's very very well insulated and here is a little 40 inch tall closet I built into the room for clones/starters. It will have a sealed door with it's own ventilation. Big enough for a small LED. Maybe my Advanced 150 would be perfect for it. As you can see I put 1 outlet in there too.
For electric I ran 2 breakers to the room. Both breakers are 20 amp and each ran with 12-2 wire and each breaker runs 3 outlet locations. On one end of the room there is the 1 outlet in the small clone/starter closet and a 4 outlet box on the ceiling and a 2 outlet box on the floor on 1 breaker. On the other breaker for the other side of the room I have a 4 outlet box in the ceiling on that side as well as a 2 outlet box in the larger blower, supply closet and a 2 outlet box down towards the floor.
This will provide an excess of power capability to the nearly 2000 true watts worth of LED's that will be flooding the room. All outlets are 20 amp outlets as well.
The other closet with the drill in the picture is actually a big closet. Bigger than the opening anyways. In that one I built it at ceiling height so my blower and carbon scrubber can be there and out of the way of the plant area. The second closet is big enough for a bale of ProMix and all of my nutes, the blower and more. I think it will work out quite well. What do you guys think?
I decided to invest in some supplies and put myself to work. The new grow room is almost 6 feet wide by 7 feet long by 6.5 foot ceiling.
It's very very well insulated and here is a little 40 inch tall closet I built into the room for clones/starters. It will have a sealed door with it's own ventilation. Big enough for a small LED. Maybe my Advanced 150 would be perfect for it. As you can see I put 1 outlet in there too.
For electric I ran 2 breakers to the room. Both breakers are 20 amp and each ran with 12-2 wire and each breaker runs 3 outlet locations. On one end of the room there is the 1 outlet in the small clone/starter closet and a 4 outlet box on the ceiling and a 2 outlet box on the floor on 1 breaker. On the other breaker for the other side of the room I have a 4 outlet box in the ceiling on that side as well as a 2 outlet box in the larger blower, supply closet and a 2 outlet box down towards the floor.
This will provide an excess of power capability to the nearly 2000 true watts worth of LED's that will be flooding the room. All outlets are 20 amp outlets as well.
The other closet with the drill in the picture is actually a big closet. Bigger than the opening anyways. In that one I built it at ceiling height so my blower and carbon scrubber can be there and out of the way of the plant area. The second closet is big enough for a bale of ProMix and all of my nutes, the blower and more. I think it will work out quite well. What do you guys think?