Jamaica Seeds Blackout Kush #2

CrimsonBlitz;1805748 said:

copy and pasted. hope it helps


3. If you are experiencing Nutrient Lockout. Usually (NOT ALWAYS!) when you have a dramatic nutrient imbalance the cure is not to try to figure out the exact one, but flush the plants, and add a fresh WELL BALANCED and MEDIUM STRENGTH dose of nutes. Now don't go flushing at every burned leaf or tinge of yellow. Use common sense. But if you see dramatic problems, and there are no obvious signs of another problem like heat, cold, grey goop in the res, root rot, etc - then its prolly not a bad idea to flush the plants and re-fill the res.

Now that you understand the WHAT, WHY and WHEN of flushing - let's talk turkey and get to the HOW.

I have experience with the 3 basic techniques: Plain Water, Water with extremely low nutes, and Clearex - there is a time and place for all of them and the method is basically the same. And remember if you have plants in multiple containers - feel free to experiment with multiple methods on the same grow.

I use Clearex and will describe that method in detail. Clearex is a brand name flush from Botanicare. Many folks use plain water or a very, very mild nutrient/water mix just as effectively. I won't try to make a suggestion on ppm for what a very light mix is, but let me tell a quick story to illustrate.

I had 5 plants in 5G soil that were ready for harvest. I thought. 4 plants did indeed finish in the next 4 or 5 days after the Clearex flush and it was perfect. They tasted great after an 8 day dry and 2 week cure.

The fifth plant, however, was not quite finished. So I decided to give it one more feeding, then wait three days, then flush again using the low ppm method as a test. All the plants had been receiving about 1250ppm the week before. So I fed this one 750ppm with very little runoff. Then three days later I gave it 100ppm with about 50% runoff. Then 4 days later I gave it plain water with about 50% runoff. Then 3 days later I cut it. So the timeline at the end was: Wed - Clearex 5 plants; Sun - Chop 4, feed 1 750; Thurs - feed 100; Sunday - plain water; Wed - Chop. This was wrong. I had not allowed enough time at the end, nor used enough plain water.

I dried that plant exactly the same 8-10 days as the others - 'til her stems snapped fine, then the cure. After a two week cure the smoke was still extremely harsh on the exhale, and the buds crackled when burned. BTW - this is the sure sign of a bad cure or flush - if the smoke tastes fine on the way in but becomes ridiculously harsh on the way out. So I put that bud back in to cure and left it for the last to be smoked. six weeks of curing later - for a total of TWO MONTHS OF CURING - it was still snap, crackle pop and tasted harsh. So I can't give you an estimate on what low ppm means, but I can tell you what I did was NOT enough of a flush. Perhaps someone who uses the low ppm method effectively can add to this. Now back to our regularly scheduled program with a method that I have had 100% success with.

HOW TO:

Remember - when you are flushing, you are trying to get rid of that buildup of nutrients. Most of that buildup is NOT above the ground. You are trying to flush the roots and soil. So try to do it at the beginning or end of the day when you can mist the plants with plain water. This will lower their transpiration and keep them from sucking up more flush water than they need. This step is not required, but its on the Clearex label so I do it.

Step 1 - Drain your res and refill. Add Clearex at about 20-30ml / Gallon. pH balance to 5.7-6.2 depending on whether you're hydro or soil.

Step 2 - Run this mix through your plants. If you are doing containers you want to achieve significant runoff. Far more than your standard watering. The bottle calls for AT LEAST 80-90% runoff. So if you have a 5 gallon pot, you will want to put 3-6 Gallons of water through depending on how dry the soil is when you flush, and how much drainage. With a little experience with your soil you can skip the rest of the steps and call it done right there. If you really want to be sure then use the ppm measuring described below.

If you are doing hydro, saturate the system for 5-15 minutes then allow it to drain back to the res. No need to drain the res.

Step 3 - Measure the ppm of the runoff.

Step 4 - Run the same Clearex/water through again.

Step 5 - Again measure the ppm of the runoff. The ppm should be the same or higher than the first time. This is because you are sucking all those excess nutes out.

Step 6 - Keep repeating this cycle until you see little to no change on the ppm. For me this is usually two times, sometimes three.

That's it!

Now drain the res again. Refill with your regularly scheduled nutes or water and let the timer do its thing.

I hope this helps.

Keep on Growin!!

Click to expand...