Thought I would upload some pics of a simple carbon scrubber.
Parts Needed:
5 gallon bucket
1' X 6" chimney pipe
30 to 40 lbs of activated carbon
pantyhose
6' inline fan
Take lid and drill 6" hole in center
Drill numerous 1/8" holes in lid.
Put pantyhose on end of 6" pipe
Put pipe in bucket
Fill with activated carbon
Install lid
Put 6" fan on end.
I have the fan set so that it blows the dirty air into the carbon.
Parts Needed:
5 gallon bucket
1' X 6" chimney pipe
30 to 40 lbs of activated carbon
pantyhose
6' inline fan
Take lid and drill 6" hole in center
Drill numerous 1/8" holes in lid.
Put pantyhose on end of 6" pipe
Put pipe in bucket
Fill with activated carbon
Install lid
Put 6" fan on end.
I have the fan set so that it blows the dirty air into the carbon.
![Carbon_Scrubber5.jpg](https://www.420magazine.com/gallery/data/829/Carbon_Scrubber5.jpg)
![Carbon_Scrubber4.jpg](https://www.420magazine.com/gallery/data/829/Carbon_Scrubber4.jpg)
![Carbon_Scrubber2.jpg](https://www.420magazine.com/gallery/data/829/Carbon_Scrubber2.jpg)
![Carbon_Scrubber1.jpg](https://www.420magazine.com/gallery/data/829/Carbon_Scrubber1.jpg)